Hi Jim,
Contact your local power company and have them fix that! There are standards
which they should adhere to.
OR, tell them you'll only pay 86.6% of the bill...........
73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
RF Applications Power Measuring equipment, See the VFD & WinWatt!
www.radiodan.com <http://www.radiodan.com> RFpower@radiodan.com
<mailto:RFpower@radiodan.com> A trip to our web site is worth the click!
> -----Original Message-----
> From: owner-amps@contesting.com [mailto:owner-amps@contesting.com]On
> Behalf Of Jim Price N3QYE
> Sent: Tuesday, November 09, 1999 8:32 PM
> To: amps@contesting.com; pvrc@qth.net
> Subject: [AMPS] SB200 using 208VAC ?
>
>
>
> Someone has lent me a SB200 for the SS fone contest. At his shack it
> puts out 600w using 240VAC. At my shack I only have 208VAC available,
> and the amp only puts out 350w. We measured the current with load
> applied and it measured 206V.
>
> 1) Is the drop in power likely attributable to the drop in available
> voltage?
>
> 2) Are there any practical remedies (other than finding a 240V source)?
>
> 73
>
> Jim N3QYE, n3qye@ipass.net
> Raleigh, NC
>
> --
> FAQ on WWW: http://www.contesting.com/ampsfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|