Previous owner attempted to convert the 10 meter tap to 6 meters. No tubes.
Power supply checks out at 2340 vdc and the filaments in another set of
tubes I had dropped in lit up (this one does not come with tubes however).
T/R relay engages as it should. All is their to put it back to stock
configuration. Overall condx around an 8/10. Have manual.
I was going to drop in a pair of 8874s or 4CX400s (same filament voltage as
the 572Bs) but decided I already have enough projects.
$150 + UPS charges on 42 pounds from San Diego 92139
73s
Lane
Ku7i
San Diego
619-470-6528
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|