>
>> A linear does not demand constant gain at any power level, within the
>> context of this discussion
>
>You have an interesting definition of linear then.
Indeed, Mike, indeed.
>An "amplifier for SSB"
>may not demand constant gain, but by definition, a linear amplifier does. It
>also requires linear phase but I seldom see a phase/amplitude AM/PM
>conversion or group delay plot for an amateur PA.
>
>The DAF circuit relies on the envelope of the drive signal. If it can peak
>hold well enough then it will appear to be linear. Hence the good 2 tone
>test results. It will also work well for speech as long as the speech has
>sufficient energy to maintain the screen potential nearly constant. The IMDs
>will be a function of the modulation envelope and the time constant of the
>screen supply.
>
>A better way is to use a detector that only biases the valve on when there
>is a signal to amplify, but to ensure no nasty switch on transients, it
>really needs a delay line. This is easy with DSP and is something that
>modern rigs could usefully add to their feature list. The DSP could also do
>useful speech filtering, pre-distortion and compression.
>
Rogers on that, good buddy.
cheers, Mike
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|