>
>Mike
>Be careful with your purchase and be aware that running on 50Hz AC requires
>more iron in the core of the power transformer than the standard 60Hz in
>use in the US.
However, 240v / 60Hz transformers work semi-ok on 200v / 50Hz -- although
the voltage will obviously be lower. The right way to do it is with
240v, 220v, 200v primary taps, a gorilla core, and a filament v adj
rheostat with rear panel jacks for a DMM. . . . .
>
>Make sure you get a model with plenty of reserve capacity it the power
>supply department so that your do not over stress the power transformer.
>
amen, Alek, and handles would be nice. .
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|