Diode stack #24050 is rated at 32KV PIV with center
tap, allowing two units to be used in bridge configuration.
They are rated at a conservative 1.2A CCS with a 60A
surge current. Diodes are individually rated at 2.5A.
you will find the specs at: http://www.rfparts.com
Regards, Merit W6NQ
----- Original Message -----
From: Radio WC6W <wc6w@juno.com>
To: <amps@contesting.com>
Sent: Sunday, January 30, 2000 9:11 AM
Subject: Re: [AMPS] Diode stacks
>
> >I bought a couple of diode stacks at TRW and was told they were 15kv
> @1.5A,
> >they have a part number on the side that reads P/N 24050 and I T H I N
> K
> >they might be for Henry amplifiers. Can anyone verify this for me and
> tell
> >me what the specs actually are before I lite them up?
>
> > Thanks.
>
> > Mike - W6FFC
>
> Hi Mike,
> Those sound like RF Parts... parts.
>
> Take a look at: http://www.cts.com/sd/marnold/hvrect.html
>
> 73,
> Marv WC6W
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> --
> FAQ on WWW: http://www.contesting.com/ampsfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|