Amps
[Top] [All Lists]

[AMPS] tetrode output

To: <amps@contesting.com>
Subject: [AMPS] tetrode output
From: i4jmy@iol.it (i4jmy@iol.it)
Date: Tue, 14 Mar 2000 12:33:55 +0100
Giving half the RF voltage to the grid (-6 dB) and then regulating the 
driving power from the rig to obtain 400W.

73
Mauri I4JMY



> ---------- Initial message -----------
> 
> From    : owner-amps@contesting.com
> To      : <amps@contesting.com>, <boatanchors@qth.net>,       
<boatanchors@listserv.tempe.gov>
> Cc      : 
> Date    : Mon, 13 Mar 2000 20:58:56 -0800
> Subject : [AMPS] tetrode output

> 2. I can not reduce the output out of my TS-850 any lower than 10 
watts,
> even with alc. What kind of variable attenuator network can I build 
on the
> input side of the amp so I can vary the drive that the tube receives 
from
> the exciter? There are times when 400 watts is all that is needed.
> 




--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>