Amps
[Top] [All Lists]

[AMPS] Output Pulse from ICOM 706

To: <amps@contesting.com>
Subject: [AMPS] Output Pulse from ICOM 706
From: ITR@Nanoteq.co.za (Ian Roberts)
Date: Tue, 16 Jan 2001 08:51:53 +0200

Tom Rauch wrote:

 
> If it has DSP, at least at the current state used in our radios, it 
> better have a narrow crystal filter long before the signal hits the 
> DSP system.
> 
>  
> 73, Tom W8JI

This has smacked it on the head; DSP in the ham context has to be seen 
as cheap and nasty and a sales gimmick. High Q crystal filters remain 
expensive, while multi-mode, multi-bandwidth DSP can be implemented for 
a few dollars at most once the software has been sorted out.

One of the great advantages of DSP is the lack of ringing in narrow 
bandwidths because of near zero group delay, and reduced operator 
fatique resulting from the noise reduction.

Ian ZS6BTE


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>