Amps
[Top] [All Lists]

[AMPS] DSP & and other curiosities

To: <amps@contesting.com>
Subject: [AMPS] DSP & and other curiosities
From: W8JI@contesting.com (Tom Rauch)
Date: Thu, 18 Jan 2001 01:06:57 -0500

>    Finite Impulse Response (FIR) filters don't ring in the same sense
>    as
> a traditional analog filter or its DSP cousin the Infinite Impulse
> Response (IIR).
> 
>    The worst thing you can get from a narrowband FIR is a short chirp
>    in
> response to an impulse input.  This will persist for a couple of
> cycles whereas an analog filter with equivalent bandwidth (Q) will
> ring all day.

Rise and fall times of a CW signal require bandwidth.

Make the bandwidth narrow, and the rise and fall times always 
increase.

It is this "softening" that most people call ringing, because it 
"blurs" high speed CW or even noise pulses into an almost steady 
sounding tone.


73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>