Amps
[Top] [All Lists]

[AMPS] Nichrome wire and tube chimneys!

To: <amps@contesting.com>
Subject: [AMPS] Nichrome wire and tube chimneys!
From: 2@vc.net (measures)
Date: Mon, 14 May 2001 09:02:41 -0700
>>Just an observation, the design of a chimney is such that the vertical
>>flow of air is directed evenly around the tube envelope and as it exits,
>>also against the anode seal & heat sink at the top.  I really don't
>>think a Coleman lantern globe or a pickle jar does the job.
>>
>?   Bob:  Any opinion about the use of vertical air flow on horizontal
>cooling fins.?
>
>The lip at the top of the Eimac chimney turns a portion of the air
>90 degrees to pass horizontally over the fins of the plate cap.
>Eimac refers to the socket, chimney, and anode cap as an
>"air system." I suspect a significant amount of engineering went into
>the development of these three parts to work in concert with efficiency.
>
?  The net air flow is equal and opposite.  With vertical fins, this 
problem does not occur.  


cheers, Phil, K5PC
>
>
>
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>