SELL: Full output, matched pair of low profile Eimac 3-500's. Tested
(SB220) at 1100+ watts output with 100w of drive. Ideal replacements
for lower efficiency 3-400's in early design, minimum chassis
clearance Drake, Swan and Henry amplifiers. $240pr + shipping/Ins.
SELL: Pair of low profile (horizontality finned) heat dissipating
plate caps ideal for minimum clearance applications. $10+ shipping.
SELL:Peter Dahl 220VAC filament transformer( pair of 3-500's) rated at
5VCT@30amps. Has a 12VAC and several 105-120VAC taps to control fan
speed. Package includes a pair of porcelain 3-500 sockets wired in
parallel with grid to ground straps intact and ready to drop in.
Includes spacers and chimney clamps.(Removed in new condx from Ameritron
AL82).
$110+shipping/insurance.
SELL: Reduced emission Eimac 8877 (3CX1500A7). Tested at 1000W (60%)
output in
an Ameritron AL1500 with 60w of drive and 3.6KV plate voltage. Clean, no
dents or discoloration and date coded 1983. Shipped in original Eimac
foam padded carton. Includes a Johnson drop in air system socket with
grid-to-ground tabs. Ideal candidate for a 6m amplifier project. Can
include a 6m HV plate choke on a threaded porcelain form at no
additional cost for 50mHz operation. $160+ shipping/insurance.
Ron W2CQM/3
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|