???? why would 135 watts be too much for 3x813 gg amp??
seems i have 3200 volts availible at over 1 amp (way over) for plate---have
had estimates of 800 to 1500 watts out sent to me by the reflector, which
would be closer to the real power i shud expect?
-----Original Message-----
From: 2 <2@vc.net>
To: steve <w5set@alltel.net>; AMPS <amps@contesting.com>
To: <amps@contesting.com>
Date: Sunday, September 02, 2001 8:54 AM
Subject: Re: [AMPS] 813 amp
>>
>>building new (to me) 3 hole 813 amp. about what kind of power out can i
>>expect if running plate voltage at about 2800 to 2900 volts. driving with
>>about 135 watts. just building for 160 to 20 mtr bands. tnx fer any
info.
>>steve w5set@alltel.net
>>
>// 135w will drive 4 or 5, 813s. P.out is about 350w PEP each at
>2800v. Transverse 7" fan cooling wud be gud. "Hammer down" will hammer
>the tubes. A tuning pulser won't.
>
>cheers
>>
>>
>>--
>>FAQ on WWW: http://www.contesting.com/FAQ/amps
>>Submissions: amps@contesting.com
>>Administrative requests: amps-REQUEST@contesting.com
>>Problems: owner-amps@contesting.com
>>
>>
>
>
>- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
>end
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|