"Ian White, G3SEK" wrote:
>
> I'm presently repairing a Heath SB-1000. Are there any modifications
> that would be worthwhile while the cover is off... besides a step-start
> and a glitch resistor, that is?
I replaced the plate choke in mine with an AL80B choke purchased from Ameritron
for about $25. The original plate choke had a resonance near 17 meters. I
added a corona washer to the bandswitch lug that goes to the hot side of the
160-meter padder capacitor (I also had to replace the contact which was burned;
I never had a reoccurrence of this). Be sure to check the value of the carbon
resistor in the parasitic suppressor! I also added a vacuum relay and reed
relay for QSK (got the kit from Rich and the v. relay from Alan Bond).
73,
Vic, K2VCO
Fresno CA
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|