This is a multi-part message in MIME format.
------=_NextPart_000_0013_01C141ED.CBC4A000
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I'm building an amp using 4-572B tubes. I need a voltage doubler to =
achieve the correct voltage. My questions are,#1 Should I use a half =
wave or full wave doubler and #2 what capacitance should I use. I know =
sometimes there is point where toooo much capacitance is a problem, I =
would also like to avoid that.
Thanks in advance for your thoughts Pro and Con. Kurt...
------=_NextPart_000_0013_01C141ED.CBC4A000
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4611.1300" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I'm building an amp using 4-572B tubes. =
I need a=20
voltage doubler to achieve the correct voltage. My questions are,#1 =
Should I use=20
a half wave or full wave doubler and #2 what capacitance should I use. I =
know=20
sometimes there is point where toooo much capacitance is a problem, I =
would also=20
like to avoid that.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks in advance for your thoughts Pro =
and=20
Con. Kurt...</FONT></DIV></BODY></HTML>
------=_NextPart_000_0013_01C141ED.CBC4A000--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|