Amps
[Top] [All Lists]

[AMPS] using UF diodes...

To: <amps@contesting.com>
Subject: [AMPS] using UF diodes...
From: nospam4me@juno.com (skipp isaham)
Date: Mon, 12 Nov 2001 10:45:00 -0800
The benefits received might not be worth all the trouble. I 
just thought it a different approach, just like the Alpha 
circuit.  Different is not always betta'
cheers
skip

--------- Forwarded message ----------
From: "Lamb" <k7fm@teleport.com>
Steve asked:
". Has the shunt diode idea been tried in practice? Did it
work above 10MHz? If yes, please let me know which brand and part # was
used."
In the late 50's, I think it was W6JAT, who worked for Eimac that
published
a circuit of a shunt diode across the input circuit of a 3-1000 amp,
using a
6X4.  The diode did not have a series R, although it would have an
internal
impedance.  Circuit was claimed to work fine.  I always had a big
question
mark about it.
I have tested solid state diodes and never had success.  It may have been
my
"loose" testing setup.  Time to do more testing.
73,  Colin  K7FM

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] using UF diodes..., skipp isaham <=