[AMPS] Talking about AL1500

To:	<amps@contesting.com>
Subject:	[AMPS] Talking about AL1500
From:	alex@sandlabs.com (alex)
Date:	Wed, 5 Dec 2001 07:39:35 -0500

As one can see, Ameritron uses the AL1500 chassis for a dual tube amp also.
Therefore there is the possibility to modify the amp to have TWO 8877s
rather than one.
I wonder if any one has done this and if he/she would like to share the
knowledge with us.

Alex, N2NNU


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] AL1500, (continued) [AMPS] AL1500, <g3sek@ifwtech.com (Ian White, G3SEK) [AMPS] AL1500, <g3sek@ifwtech.com (Ian White, G3SEK) [AMPS] AL1500, Paul Christensen [AMPS] AL1500, Paul Christensen [AMPS] AL1500, Tom Rauch [AMPS] AL1500, <g3sek@ifwtech.com (Ian White, G3SEK) e: [AMPS] AL1500, Paul Christensen [AMPS] AL1500, Tom Rauch [AMPS] AL1500, <g3sek@ifwtech.com (Ian White, G3SEK) [AMPS] AL1500, <g3sek@ifwtech.com (Ian White, G3SEK) [AMPS] Talking about AL1500, alex <= [AMPS] No Blocking Cap :), alex [AMPS] AL1500, 2 [AMPS] AL1500, Jim Bryant [AMPS] AL1500, Steve Katz [AMPS] AL1500, Paul Christensen [AMPS] AL1500, 2 [AMPS] AL1500, 2 [AMPS] AL1500, 2 [AMPS] AL1500, 2 [AMPS] AL1500, Peter Chadwick

Previous by Date:	[AMPS] AL1500, 2
Next by Date:	[AMPS] AL1500, Tom Rauch
Previous by Thread:	[AMPS] AL1500, <g3sek@ifwtech.com (Ian White, G3SEK)
Next by Thread:	[AMPS] No Blocking Cap :), alex
Indexes:	[Date] [Thread] [Top] [All Lists]