> I think what you see here is maximum power transfer that occurs when
> the source impedance is equal to the load impedance . Without the
> network, they are not equal. With the network , well , they are. ---
> Ron
It is much more complex than that, because the load is very non-
linear over the RF cycle causing harmonics to be generated, so
you have to look at the real action which is much more complex
than just impedance matching.
73, Tom W8JI
W8JI@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|