Amps
[Top] [All Lists]

[Amps] SB-200 Problem

To: <amps@contesting.com>
Subject: [Amps] SB-200 Problem
From: Peter.Chadwick@zarlink.com (Peter Chadwick)
Date: Tue, 5 Mar 2002 15:05:46 -0000
Rich says:

>EUR  the sticky wicket is that the c. 100MHz energy never sees the 50? load 
>because the tank is a low-pass filter config.

I wouldn't say 'never', but it's certainly a much modified impedance. The filter
effect won't be that much of course, since it's only two octaves up. The load
could be useful in helping stability at the fundamental, though. I seem to
remember  that when I used 572Bs, the parasitic was lower than 100MHz - about 80
if I remember, but it was 35 years ago.

73

Peter G3RZP



<Prev in Thread] Current Thread [Next in Thread>