Jukka OH2BH used one at VR6BH after Brand X died.
He spoke very highly of it.
Believe Marty ZL1ANJ is still using it.
73
73
end
Barry Kirkwood PhD ZL1DD
Signal Hill Homestay
66 Cory Road
Palm Beach
Waiheke Island 1240
NEW ZEALAND
www.waiheke.co.nz/signal.htm
----- Original Message -----
From: Alek Petkovic <vk6apk@eon.net.au>
To: <amps@contesting.com>
Sent: Wednesday, March 13, 2002 1:25 AM
Subject: Re: [Amps] Emtron Amps - Anyone on here using their HF products?
> At 09:14 AM 12-03-02 -0800, Jim wrote:
> >Anyone using their products?
> >
> >http://www.emtron.com.au/amplifiers.html
> >
> >73,
> >
> >Jim, K4OJ
>
> Yep, I run the Emtron DX-2 here. I'm extremely happy with it. It's built
> big time heavy duty. It is shipped with transformer mounted. You can
> actually lift the thing and carry it around with the cover off and it wont
> bend and twist all over the place. The cover is just that and not part of
> the mechanical structure. Workmanship throughout the whole machine is just
> superb.
>
> My amp is 2.5 years old. The design and specifications have been
> considerably improved since then. I will hopefully get to play with the
> later models on my next work trip to Sydney in a couple of months.
>
> I remember a couple of years back, there was a problem with FCC compliance
> or similar. I think that the situation has been resolved but don't know
for
> sure.
>
> I also use one of their HF multiband yagis. Mine is a 3 element tribander
> with an extra rotary dipole for 12, 17 and 30m on the same boom. It works
> good and was well priced. Quality of manufacture is also very good.
>
> I have no connection with Emtron or Emtronics. I'm just happy to recommend
> things that I have had good experience with.
>
> 73, Alek.
> VK6APK
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
|