>
>I am going to purchase one of the following dayton blowers:
>
>4c446 or 4c006
>
>Any comments on the noise level of these blowers? I am replacing a
>4c004, which is undersized for my current application.
>
? Kooltronics®, in Ventura, CA, makes two, types of blowers for
high-pressure applications: radial-wheel, and large diameter/narrower
wheel squirrel-cage types. The pressure ability of the radial-wheel
type is up to six (6) inches of water column, which is roughly double the
ld/nw type. However, the trade-off is that radial-wheel =s less volume.
- Unlike consumer-product blower manufacturers, Kooltronics uses
high-efficiency capacitor-run motors that run cool to the touch. Also,
all moving parts are electronically-balanced to reduce vibration.
However, 'mo betta costs 'mo $$.
cheers, Lynn
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|