Thanks for all the ideas. I've had a few requests for a couple bits of =
data...
On 160 the target Q is 12, Plate load is 3200 ohms. =20
I have tried changing the plate blocking cap from 800 pF (it was 4 200 =
pF HT57's) to 1000 pf and 2000 pF using some HH58's. This appears to =
have helped, but it's still way down on efficiency (<50%) compared to =
any of the other bands (even 10M - 60%).
I tried changing the physical layout of the coil stock relative to the =
10/15/20 meter coils. Thinking (?) there was some wierd =
cancelling/coupling. No change.
Next experiment will be to tune the input circuit on 160. I didn't =
bother tuning either 160 or 80.
Right now the only band that is troublesome is 160.
Thanks all. 73, Bill N2BC
~~~~~~~~~~~~~~~~
Bill Coleman N2BC
http://home.stny.rr.com/n2bc
----- Original Message -----=20
From: Bill Coleman=20
To: AMPS=20
Sent: Sunday, September 22, 2002 9:51 AM
Subject: Tank tweaking
A few months ago I posted a query about crummy efficiency on my homebrew =
5CX1500 AB1 amp. I have cured most of the original problems by re-doing =
the input circuit and tweaking the output tank coils. Oh, 'tweaking' =
means creating a lot of scrap copper.
It works well on 10 through 80. Efficiency on the order of 60%, the =
'real world' tune and load pF are very close to the calculated values. =
I'm using a spreadsheet I cooked up from the W5FD formulas.
But... I have been chasing my tail on 160M. The calculated C1 / L / C2 =
values at 1.9 MHz are 298pF / 25.47 uH / 1708 pF. Actual values are 276 =
pF / 25.53 uH / 600 pF. Efficiency is off to 48%. =20
The tank coils are 3/16" copper tubing for 10/15/20 and a hunk of coil =
stock for 40/80/160. Plate blocking may be a bit small @ 800 pF - =
would that have such a huge effect on loading? The plate choke is an =
RFParts RFC-3 (Ameritron) 225 uH & I don't feel any undo heating. Plate =
bypass is a pair of 500 pF @ 30KV caps & I've tried adding an additional =
1000 pF 6KV disk ceramic with no effect.
The input is across a 200 ohm grid resistor with a 4:1 balun. It is =
untuned on 160 and 80, tuned on 10 thru 40.
Ideas?
Thanks! 73, Bill N2BC
~~~~~~~~~~~~~~~~
Bill Coleman N2BC
http://home.stny.rr.com/n2bc
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|