Step-down Pi-networks are governed by the same formulae as step-up
Pi-networks.
> I have searched and Researched articles on "design of pi-networks" and
>have noted one thing which seems to be a common thread. IE: they seem to all
>pertain to "plate to antenna " situations.. In other words, Hi impedance to
>low impedance levels, such as final amplifiers or linear amps. outputs...
> there seems to be little to nothing about "input cicuits" as it pertains
>to "exciters to amps" input ckts. IE: 50 ohms to lower impedance levels..
>There are of course some "charts" in past years of the "handbook" but are
>they relevant to today's needs??
> Just wondering !!!!
> carl / kz5ca
- Rich..., 805.386.3734, www.vcnet.com/measures.
|