Amps
[Top] [All Lists]

[Amps] Neutral vs Ground Connection for 220 VAC

To: <amps@contesting.com>
Subject: [Amps] Neutral vs Ground Connection for 220 VAC
From: stevengrant98@yahoo.com (Steven Grant W4IIV)
Date: Fri, 13 Dec 2002 08:33:35 -0800 (PST)
* let us not also forget the RF grounds (yow)
 Rich <2@vc.net> wrote:

>.> ** There could still be a safety hazard on the chassis of the amp if the
>> neutral and the ground wires were to break at the same time. Perhaps it
>> would be wise to go with a 5-wire circuit ? There would be two line
>> wires, the neutral wire, the ground wire plus the emergency-backup wire.
>> On second thought, since #6 Cu wire is so easily broken, maybe an
>> emergency-backup backup wire and a 6-wire plug/socket would be safer yet ?
>
>A current sensor could be installed on the safety ground wire where it exits
>the breaker panel. This could trigger a 6 inch fire alarm gong and red strobe
>light so that the ham shack can be evacuated in a timely manner.
>

good one, Phil

- Rich..., 805.386.3734, www.vcnet.com/measures. 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


STEVEN GRANT    W4IIV



---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---

<Prev in Thread] Current Thread [Next in Thread>