It is my understanding that Oilite style bearing do NOT require lubrication.
Due to the fact that a lubricant is (graphite??) is embedded into the metal.
Mike(y)
W3SLK
----- Original Message -----
From: "R.Measures" <r@somis.org>
To: <wx3m@comcast.net>
Cc: <amps@contesting.com>
Sent: Friday, July 02, 2004 4:44 AM
Subject: Re: [Amps] SB-220 fan (oil) question
By drilling c. a #57 hole in the casting above the oilite bearings'
felt oil wicks and injecting oil into the wick with a syringe. A
sloppier, lazier way is to use a G. C. pen-oiler to inject oil on the
shaft. next to the armature. 5w or 10w oil seems to work well.
cheers
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|