Hello
Converting a Henry 2k-4 amp with a pair of 3-500z's to a single Russian
GS-35b.
Will the tuned input circuit of the pair of 3-500's work to feed the single
GS-35b?
I know the output is ok since the plate voltage amp amperage will remain the
same as the pair of 3-500's and the plate capacitance of the single GS-35b
is low.
Any help would be appreciated. All Homebrew GS-35b amps that I have seen on
the web do not use a tuned input, but I think this is no good.
Manny
KC4MNE
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|