And the reserve is $950, for an amp that needs major mods to work on the ham
bands??? It's hard enough to find a ham willing to spend that much on legit
ham gear, and it's not even made in Japan!
Bob W6TR
----- Original Message -----
From: "Will Matney" <craxd1@verizon.net>
To: <amps@contesting.com>
Sent: Sunday, July 31, 2005 9:28 AM
Subject: [Amps] Mobile Amps
> All,
>
> I ran across this solid state amp on ebay and thought it might be a good
> one to convert over to amateur service. I about bet now it's class C but a
> bias circuit can be added. It doesn't have a good RF keyer in it either.
> However, the builder did add an air variable capacitor for output tuning
> which is a step up for most. This "Pac Man" brand is a name I've never
> heard of. From the pictures though, it looks like a good candidate inside
> and that it may have enough room for a bandswitched filter board. If your
> not interested in buying it, the pics give a good idea of what they look
> like on the inside. Also, this amp uses 8 sets of push-pull amps using 16
> transistors. In other words, it's a big amp.
>
> Link;
>
> http://cgi.ebay.com/PAC-MAN-16-PILL-10-METER-AMP_W0QQitemZ5794298630QQcategoryZ48700QQrdZ1QQcmdZViewItem
>
> Best,
>
> Will
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|