| To: | "Amps" <amps@contesting.com> |
|---|---|
| Subject: | [Amps] Spike Caps |
| From: | "Rich" <rdjmgmt@socket.net> |
| Date: | Sat, 3 Sep 2005 12:25:43 -0500 |
| List-post: | <mailto:amps@contesting.com> |
My power supply is about complete, did a test run to 3200v DC, and no
problem. It should be good for 4500+ @1amp.
My question is that I have HV diodes blocks, ECG-548's and would it do
any good (or harm) to put a 10Kv .001 disk ceramic on each one for spike
suppression? I already have the caps.
Rich, kd0zz
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] power supply capacitors, Will Matney |
|---|---|
| Next by Date: | Re: [Amps] Spike Caps, Will Matney |
| Previous by Thread: | [Amps] 3CX800A7, Jim Brown |
| Next by Thread: | Re: [Amps] Spike Caps, Will Matney |
| Indexes: | [Date] [Thread] [Top] [All Lists] |