To: | jsb@digistar.com, aa4lr@arrl.net |
---|---|
Subject: | Re: [Amps] AC wiring |
From: | Gudguyham@aol.com |
Date: | Thu, 20 Oct 2005 08:56:42 EDT |
List-post: | <mailto:amps@contesting.com> |
In a message dated 10/19/2005 8:29:38 P.M. Eastern Standard Time, jsb@digistar.com writes: I've got a 1500W space heater but I run it on the lower power setting (900W) because i'm afraid the 1500W setting would burn the house down as it is fed with #14 on a 15A circuit. Have a look at the wire that the manufacturer used on that heater. It is probably #14 stranded. It will get warm to the touch at 1500 watts, but the wire is made for that heat and it's UL approved. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] AC wiring, Gudguyham |
---|---|
Next by Date: | Re: [Amps] AC wiring, Gudguyham |
Previous by Thread: | Re: [Amps] AC wiring, Gudguyham |
Next by Thread: | Re: [Amps] AC wiring, Jason Buchanan |
Indexes: | [Date] [Thread] [Top] [All Lists] |