Amps
[Top] [All Lists]

Re: [Amps] Measuring tank Q

To: John Popelish <jpopelish@rica.net>, Amps@contesting.com
Subject: Re: [Amps] Measuring tank Q
From: Bill Turner <dezrat1242@ispwest.com>
Date: Mon, 09 Jan 2006 15:07:19 -0800
List-post: <mailto:amps@contesting.com>
ORIGINAL MESSAGE:

At 02:48 PM 1/9/2006, John Popelish wrote:
>Sounds pretty reasonable to me.  One detail:  You get a slightly more
>accurate center frequency by taking the square root of the product of
>the two -3db frequencies.  This is the geometric mean, rather than the
>average.  But at a Q of 12, it makes only a tiny difference.
>_______________________________________________


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Good point. I changed the spreadsheet and uploaded the new one. It 
changed the Q 12 to 11.99, and the correction factor to .9195, but 
every little bit helps. :-)

Thanks.

Bill, W6WRT

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>