Thanks to all who replied on the list and privately. I will indeed look
into the clear high temp engine enamel.
In answer to all the silver plating suggestions, yes I thought of that
first, but after a while a large 75 meter copper tubing coil with silver
oxide would look real nasty. A shiny copper coil would appeal to me more.
Thanks to all,
73,
Ken W2DTC
----- Original Message -----
From: "David C. Hallam" <dhallam@rapidsys.com>
To: "kenw2dtc" <kenw2dtc@comcast.net>; <amps@contesting.com>
Sent: Tuesday, January 24, 2006 3:39 PM
Subject: RE: [Amps] spraying tank coils ?
> Go to your local auto parts store and get some clear high temp engine
> enamel.
>
> David
> KC2JD
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of kenw2dtc
> Sent: Tuesday, January 24, 2006 3:31 PM
> To: amps@contesting.com
> Subject: [Amps] spraying tank coils ?
>
>
> Hi,
> I just wound a shiny 75 meter pi-net tank coil out of 5/16 inch copper
> tubing. Can I spray it with something to keep the copper shiny or will it
> go up in smoke or fire when operating?
> 73,
> Ken W2DTC
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
>
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|