Johnson was picked up by Cardwell
In CARDWELL catalog p/n 154-3-1 (Johnson p/n was 154-3) (single section): Peak
withstanding voltage is 2000, 488-19pf. Its about 5 inches between front and
rear mounting holes. If this sounds about right then not good for 2700VDC.
Arne N7KA
-------------- Original message --------------
From: jkearman@att.net (Jim Kearman)
> Don't have a Johnson catalog, need to know breakdown V or plate spacing of an
> EF
> Johnons 154-3 variable. I believe this one goes to about 490 pF. Wonder if
> large
> enough to use with 2700-V Ep, 1500-W-out amp. Thanks.
>
> 73,
>
> Jim, KR1S
> http://kr1s.kearman.com/
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|