I cannot help you with your Henry amp, but so far this year I have seen more
than 3500 posts on this list. I joined the list last year in mid-July and
saw about 2600 posts to the end of the year.
73, Keith NM5G
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Bob Maser
Sent: Wednesday, June 28, 2006 9:24 PM
To: AMPS
Subject: [Amps] Henry 4K-Ultra Schematic Error
I didn't get any replies to my original post so here it is again.
On the schematic of the power supply (page 25) it shows that R112 is 15 ohms
75 watts and R113 is 75 ohms 25 watts. On the list of parts on page 20
R112 and R113 are listed with the values reversed. Which is correct?
It's strange how some people carry on and on and on with some of these
worthless threads and yet ignore some inquiries that could be easily
answered. I don't have the statistics but it seems to me that the number of
posts on this AMPS reflector has quadrupled during the last year.
Bob W6TR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|