Amps
[Top] [All Lists]

Re: [Amps] AL-1200 Current Limit Relay Noise

To: amps@contesting.com
Subject: Re: [Amps] AL-1200 Current Limit Relay Noise
From: "Ken, KA0W" <cw@ka0w.com>
Date: Fri, 3 Nov 2006 09:53:09 -0800 (PST)
List-post: <mailto:amps@contesting.com>
Tom,

parts list says DC DPST 30amp for RLY3. List could be
in error. Will check it out tonite.

Thank you,

Ken,KA0W




--- Tom W8JI <w8ji@w8ji.com> wrote:

> > Anyone know what causes the filter cap current
> > limiting relay / 20 ohm resistor combo (RLY3) to
> sound
> > off in an Ameritron AL-1200?
> 
>  That is an AC relay, not a dc relay.
> 
> That buzz sometimes comes from the mounting screw
> being too 
> tight. Other than that or realigning the coil to the
> moving 
> contact bar, the only choice is replacing the relay.
> 
> 73 Tom 
> 
> 
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>