Listsmates,
I'm working on a Globe King 400 ... conventional push-pull output using a
pair of V70D's and link coupling. Design operating current is 300ma and for
the life of me I cannot load above 200ma (into dummy load).
1. Off resonance current is >500ma
2. Tested with two sets of tubes
3. HV correct at approx 1400v
4. Tried links of 3 turns (original) and 5 turns - no difference
5. Tried vari cap in series with link - no help
6. Grid current correct at 40ma
Any ideas for me and thanks in advance.
73, Bob
WØYVA
Personal site: http://www.isquare.com/personal_pages/ras-hardware.htm
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|