Gary Schafer skrev:
> Check your MFJ-259B on a good dummy load. I just got done checking some
> loads with mine. I thought I had a bad load but found that the MFJ is only
> good to around 60 MHz and then it starts showing swr above that.
>
> 73
> Gary K4FMX
>
That is not universal, I just checked mine with a Narda reference load,
and it shows a perfect 50 Ohm match to 172MHz. I did replace the crappy
PL connector it was born with with a Suhner N-connector though....
--
Vy 73 de OZ1PIF/5Q2M, Peter
** CW: Who? Me? You must be joking!! **
email: peter(no-spam-filler)@frenning.dk
http://www.frenning.dk/oz1pif.htm
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|