Used to do something like this in the 70's at microwave.
David
G3UNA
>
> From: Bill Fuqua <wlfuqu00@uky.edu>
> Date: 2007/09/12 Wed PM 02:33:00 BST
> To: bumerang boom <bumerang.boom@yahoo.com>,
> "amps@contesting.com" <amps@contesting.com>
> Subject: Re: [Amps] Load Pulling
>
> 20ns x 70 =1400 ns
> every 500 ns?
>
> Seems to me that the easiest way would be to
> construct a tuner and a 50 ohm dummy load with
> a thermometer.
>
> Tune for max dummy load temp. and then measure the impedance of the
> tuner-dummy-dummy load.
> Change the sign of the j ( imaginary) component and you have it.
>
>
>
>
>
> At 06:44 AM 9/12/2007 -0400, bumerang boom wrote:
> >Hello, one and all.
> >I need to characterize the output an unusual AMP. It
> >outputs a 20nS 70Square pulse every 500nS.
> >I would like to measure it's output complex impedance
> >but
> >I am not sure if the usual equipment like an antenna
> >tuner and a SWR meter will indicate correct values.
> >
> >Can any one help with ideas in the test bed
> >construction?
> >Any help will be greatly appreciated.
> >
> >N2NNU
> >
> >
> >
> >____________________________________________________________________________________
> >Looking for a deal? Find great prices on flights and hotels with Yahoo!
> >FareChase.
> >http://farechase.yahoo.com/
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
-----------------------------------------
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|