Hi all,
After building a new antenna today I was using my ATU to get swr
down to 1.1. when both my ATU and a 2nd SWR mtr showed no reflected
power the amp was showing 20+w reflected. So I checked on the comp
link with the REFL command, it was sating 28w reflected.
so I adjusted the ATU until the amp showed 0w ref and the computer
was saying 1w reflected. At this point both the ATU and 2nd SWR mtr
were showing around 35-40w reflected.
I get the same sort of thing on all my antennas.
I don't have a dummy load to test it on.
Now I'm confused !!!
Paul G0HWC
Check out my website www.g0hwc.com / www.sstv.org.uk
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|