Use what you can find at the local hardware store. Then get some fine sand,
like the kind used in ash trays in hotel lobbys. Fill the copper tubing with
the sand and seal the ends. Now you can wind the coil around your form and not
have to worry about kinks. When you are finished remove the sand and your
coil is perfect.
Good luck.
Larry
N7DD
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|