Are you sure it has a T/R relay inside of it? Perhaps it's a repeater amplifier
with no T/R switching. If it does indeed have a relay, the relay must be
defective. Does the receiver work when the amplifier is in line and not
transmitting?
73
Jim W7RY
----- Original Message -----
From: ian swain
To: Amps@contesting.com
Sent: Saturday, March 01, 2008 1:30 PM
Subject: [Amps] TE SYSTEMS 1412G
Hi guys
I have a TE SYSTEMS 1412G that has a problem where with the amp in circuit
and turned off ie by passed there is a high SWR and almost no power
out the other side.
When the amp is turned on in operate mode it works fine low RF input
good swr
and high RF output.
I opened it up is find what looks like a sealed relay thinking bad or dirty
relay contacts.
Has anyone had this issue ? I have looked on the web for TE SYSTEMS
with no luck. As I need a manual as well and circuit diagram.
Any advice is welcome.
Regards
Ian de ZL2IAS
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|