Ive never replaced one or heard of a problem. The PS caps are already
charged and wont discharge much in the time the switch is thrown.
Carl
KM1H
----- Original Message -----
From: "Steve Flood" <kk7uv@bresnan.net>
To: <amps@contesting.com>
Sent: Friday, March 28, 2008 12:35 PM
Subject: Re: [Amps] SB220 "A" mods
> I've often wondered about the "MODE" switch? It selects the appropriate
> winding tap on the primary for higher voltage SSB or lower voltage CW.
> As you switch from one mode to the other, there is a temporary open
> circuit
> on the primary as the switch cotactor swings from pole to pole. Has this
> ever been a problem?
>
> Steve KK7UV
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|