Am I wrong here? I though effiency was: power output in watts / (plate
voltage under load x plate current). Is this incorrect?
73 Dave N3DB
----- Original Message -----
From: "Gary Schafer" <garyschafer@comcast.net>
To: "'Paul M Dunphy'" <amplifier@ve1dx.net>; <amps@contesting.com>
Sent: Thursday, March 05, 2009 4:45 PM
Subject: Re: [Amps] An Extra Thank You!
>
>
>> -----Original Message-----
>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>> Behalf Of Paul M Dunphy
>> Sent: Thursday, March 05, 2009 4:34 PM
>> To: amps@contesting.com
>> Subject: Re: [Amps] An Extra Thank You!
>>
>> At 05:22 PM 3/5/2009, you wrote:
>> >I didn't add the drive back in on mine, so I'm off by that 20W.
>> >
>> >I'm not sure I completely understand why the drive is added back. You
>> >could write a thick, thick book with what I don't know about tubes,
>> >because when I went to school they weren't taught anymore.
>> >
>> >Jeff/KD4RBG
>>
>> Jeff,
>>
>> I'm pretty sure it's because in a grounded grid amplifier the
>> input drive signal is passed straight through, so you get it plus
>> whatever the tube(s) squirt out.
>>
>> I'm sure there is a better "electrical engineer" answer, but
>> that's how I understand it.
>>
>> 73, Paul VE1DX
>>
>
> Yes drive power does need to be considered when figuring efficiency of a
> grounded grid amp as part of the drive power does pass thru the amp. But,
> not all of the drive power appears in the output of the amp. Part of it is
> consumed in driving grid which gets turned into heat and is not passed
> thru.
> Also the input circuit has some losses too. It is not easy to determine
> the
> exact amount of drive power consumed by the tube. A very rough guess would
> be around 30%.
>
> 73
> Gary K4FMX
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|