Thanks, guys.
Looks like I can get the Fluke 80K-6 probe for less than $100 new, so
it's hardly worth messing about with resistors, boxes, etc.
73,
Jim, N7CXI
Bill, W6WRT wrote:
> ORIGINAL MESSAGE:
>
> On Thu, 06 Aug 2009 18:16:21 -0700, Jim Barber <audioguy@charter.net> wrote:
>
>> How about:
>> (1) Five hand-selected 1M, 2-watt in series on a PCB or perfboard
>>
>> (2) Bring out two HV connectors from the "bottom-most" resistor in the
>> chain and then use a precision 1KV FET meter or VTVM, reading it as "x5"
>> (I already have the meters)
>
> REPLY:
>
> Either one of those will work, the question is how will you verify the
> accuracy?
>
> I recommend getting a Fluke DMM and a Fluke HV probe. Spend the money, you
> won't
> be sorry.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|