I don't have one, but first thing I'd do is check the manual, then the
schematic. It should show the 10 meter operation. Does the band switch
even go to the 10m position?
73
Roger (K8RI)
Mike wrote:
> Can someone confirm that the green wire at the rear of the unit on the band
> switch is the one to cut for 12 and 10 meter operation. Friend here just
> got a new one and we are wiring it up for 240v operation and might as well
> get it going on 10m while the cover is off.
>
>
>
> Unfortunately no one knew what wire to cut at HRO where he bought it.
>
>
>
> Thanks,
>
>
>
> 73, de Mike K6BR
>
>
>
> <http://www.k6br.net/> http://www.k6br.net
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|