Aloha All,
I have a Henry 2KD-5 that has been sitting for a few years and after doing some
repairs and tube replacement I turned it on and the plate voltage went to
4000V before I could turn it off. One of the filter caps smoked and now 1 has a
short they all seemed hot, they are the orignal filter caps. I plan on
replacing the all but I want to know if this will cure the problem. I checked
the HV supply wiring and it is fine. Should I look at anything else?.
Roland AH6RR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|