Looking for a couple of panel meters for an amplifier project. They need to
be at least 3" wide and not more than 3.75" wide. I don't want the old style
square or round meters. Prefer the newer Triplett, Modutec, or Simpson. If
you have the bezels all the better or even lighted is fine too.
I don't care what the meter face is. I'll put a new face on it with Tonne's
Meter program.
I'll be scaling them to 1mA so movement is not that important. Less current,
I can build a shunt, more current or voltage I can remove the internal
resistor or shunt.
Thanks
73
Jim W7RY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|