Don't overkill if this is for 30Mhz or lower. The tapered adaptors
are great if you are needing low reflected at 432, but any tight
mechanical connection will work for the low bands.
Don WA4NPL
Quoting "Gary Schafer" <garyschafer@comcast.net>:
> I have a large Bird load with a 3 1/8 inch flange connector. I need an
> adaptor to go to type N or other connector.
>
> Someone contacted me a while back that had a 1 5/8 to QC adaptor from a
> smaller Bird load but I lost the info. I think I could use that to build the
> adaptor I need.
>
> Thanks for any help
> Gary K4FMX
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|