[Amps] "Pi" or a "Tee" input circuit

Amps

[Amps] "Pi" or a "Tee" input circuit

To:	<amps@contesting.com>
Subject:	[Amps] "Pi" or a "Tee" input circuit
From:	"TL_IARC" <4z4tl@iarc.org>
Date:	Sat, 20 Mar 2010 20:16:21 +0200
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

Hello all

Trying to decide between a "Pi" and  a "Tee" input circuit,  for a 50Mhz single 
3-400Z amp.

(formerly an AL-80A with a 3-400Z replacement).

 Any thoughts please?

 Thanks in advance, Isaac, 4Z4TL

Isaac, 4Z4TL
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] "Pi" or a "Tee" input circuit, TL_IARC <=

Previous by Date:	[Amps] Tuned Input for G-G 50Mhz amp, 4z4tl
Next by Date:	[Amps] 91B problem in Paraguay, DALE LONG
Previous by Thread:	[Amps] Tuned Input for G-G 50Mhz amp, 4z4tl
Next by Thread:	[Amps] 91B problem in Paraguay, DALE LONG
Indexes:	[Date] [Thread] [Top] [All Lists]