Date: Mon, 5 Apr 2010 21:38:15 -0500
From: "Bob AD5VJ" <ad5vj@ad5vj.com>
Subject: Re: [Amps] DRAKE L-7
I am looking at the meter right now in ssb mode and it shows at idle 3600
Plate Volts and zero plate amps.
## My guess is, it has an after market xfmr in it. I own 4 x L4B's
and they are all 2650 vdc no load..... and 2500 vdc @ 800 ma...cxr.
2 kw dc input.. and 1290 w out. The L4PS and L7PS are identical.
I think the power meter is supposed to be reading power out to the antenna
but not sure it could be power input to the plate. Doesn't the output power
in this case seem a little high on the drake avg power meter?
## all wattmeters read OUTPUT power. The L7 reads AVERAGE power,
unless it has a PEP board installed.
## do u have another wattmeter u can try? What do u get when u quickly
whack it with a 2 x sec dead cxr ??
later... Jim VE7RF
Bob AD5VJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|