The microHAM Band Decoder has been discontinued for two years. It
was replaced by the Station Master which does (after configuration)
follow nearly any computer controllable transceiver without the
need for an active computer.
See: http://www.microham-usa.com/Products/sm.html The user manual
is available at: http://www.microham.com/Downloads/SM_English_Manual.pdf
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of JayKay
> Sent: Wednesday, April 21, 2010 5:33 PM
> To: Amps@contesting.com
> Subject: [Amps] Band Decoder, TS950
>
> I am presently using a homebrew decoder for my Kenwood TS950 to read the
> RS232 data (using a STAMP chip) and setting the proper outputs (multiple
> "IF" conditions on reading the RS232 data) to drive my antenna relay box.
>
> Its getting buggy after many years and I don't want to revisit the R & D
> project it was to find out the bug why its sometimes doesn't read the data
> right. I am assuming the 950 is always reading it correctly as only one of
> 9 bands occasionally doesn't close. It could be the relay driver but as I
> said, I am not in the R & D mood anymore HI
>
> I am looking to dump the decoder I have but I don't see much out there
> with the possibility of a box by microHAM
>
> http://www.wimo.com/cgi-bin/verteiler.pl?url=antenna-switch-
> microham_e.html
>
> Anyone know if this unit can switch antenna relay without the use of a PC?
> If so has anyone ever used one? Is there another decoder I am not aware of
> for the TS950?
>
> Thanks in advance
>
> 73
> Jay
> W2IJ
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|