Since when is a stock Miniductor silver plated? They are copper wire with a
very thin tin plate.
Carl
KM1H
----- Original Message -----
From: "David Jordan" <Wa3gin@comcast.net>
To: "'Carl'" <km1h@jeremy.mv.com>; "'Vic K2VCO'" <vic@rakefet.com>; "'Amps
reflector'" <amps@contesting.com>
Sent: Monday, May 03, 2010 9:04 AM
Subject: RE: [Amps] Cleaning air-wound coils
> Brasso works great and leaves a film that helps reduce oxidation of the
> silver plating. Just finished restoration of an HT-41...looks brand new.
>
> 73,
> Dave
> Wa3gin
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Carl
> Sent: Monday, May 03, 2010 8:58 AM
> To: Vic K2VCO; Amps reflector
> Subject: Re: [Amps] Cleaning air-wound coils
>
> Comet and a toothbrush.
>
> The problem is keeping it looking fresh without affecting performance.
> Maybe
>
> a very light coat of clear acrylic if the RF doesnt get them too warm.
>
> If youre real talented maybe a fast dip in a solder pot after cleaning or
> even silver plating.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Vic K2VCO" <vic@rakefet.com>
> To: "Amps reflector" <amps@contesting.com>
> Sent: Sunday, May 02, 2010 10:36 PM
> Subject: [Amps] Cleaning air-wound coils
>
>
>> How do you get the tarnish off of miniductor or airdux-type coils wound
>> with tinned wire?
>> It's hard to get steel wool in between the turns!
>> --
>> Vic, K2VCO
>> Fresno CA
>> http://www.qsl.net/k2vco/
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|