Amps
[Top] [All Lists]

Re: [Amps] How to read the 3-500Z spec sheet?

To: <Gudguyham@aol.com>, <ranchorobbo@gmail.com>, <amps@contesting.com>
Subject: Re: [Amps] How to read the 3-500Z spec sheet?
From: "Carl" <km1h@jeremy.mv.com>
Date: Sun, 23 May 2010 12:34:10 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Try sticking to the 3-500Z and the service in the discussion Lou.

You might also want to look at the 3-500Z Eimac specs at the Absolute 
Maximum Ip rating for Class B linear service.

And at some point put an AL-80 on an SA and look at the IMD when operated 
full bore. It aint pretty.

Carl

------------



In a message dated 5/23/2010 11:16:53 A.M. Eastern Daylight Time, 
km1h@jeremy.mv.com writes:
At 2700V @ 400 ma it doesnt matter if its CCS or not
Carl, how do you account for a pulse rating on a tube? For a 3cpx1500a7 tube 
the plate current is 50AMPS and the Anode V is 10KV and the output power is 
306KW!!  Is it not a Po vs time? 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>